PLD/PLD-T Desktop Thin Film PLD System with Thermal Evaporation
£0.00 excl VAT
Pulsed Laser desktop system
PLD: Compact Desktop Thin Film PLD
Pulsed Laser Deposition technique leads to efficient, none-thermal ablation and preserves the stoichiometry of the target materials. By applying this method it could deposit materials such as nitrides, oxides, super lattices, polymers, composites.
PLD is equipped with a multi-target manipulator which includes three 2 cm diameter. Targets are in standard size. All of our target manipulators are motorized and includes target rotation
PLD-T: Compact Desktop Thin Film PLD with 3 Evaporation sources
PLD – T is a high vacuum thin film deposition system enables to deposit different materials by both Pulsed Laser Deposition and so thermal evaporation technique.
It can deposit complex materials and crystalline structures onto substrates with very little setup involved.
PLD – T is equipped with a multi-target manipulator which includes three 2 cm diameter.
Targets are in standard size. All of our target manipulators are motorized and includes target rotation
Thermal evaporation sources (Boat / Basket / Coil)
The PLD – T is fitted with three independent heat resistance thermal evaporation sources. Design of the evaporation source holder avoids cross contamination from sources materials to other materials.
The length of source holders can be adjusted in the range of 5~10 cm which meets the costumer requirement.
Applications
Thermal evaporation sources (Boat / Basket / Coil)
The PLD – T can be fitted with three independent heat resistance thermal evaporation sources. The good design of the evaporation source holder causes no contamination transfer from sources materials to other materials. The length of source holders can be adjusted in the range of 10 – 5 cm which meets the costumer requirement.
Target Manipulator
PLD – T is equipped with a multi-target manipulator which includes three 2 cm diameter. targets as standard.
All of our target manipulators are motorized and includes target rotation.
Vacuum Chamber – The vacuum chamber is a 300 mm OD x 250 mm H, stainless steel with four 2” windows. Considering that the energy source (pulsed laser) is outside the deposition chamber, PLD technique is extremely clean process for thin film deposition and it facilitates a large dynamic range of operating pressures.
Touch screen control with colourful display
The system is equipped with a 7” coloured touch screen and full automatic control and data input that can be operated by even inexperienced users. The vacuum, current and deposition information can be observed as digital data or curves on the touch screen. Information of the last 300 coatings can be saved in the history page.
Features
- Target manipulator with adjustable rotation speed.
- 3 thermal sources and special feedthrough.
- Quartz crystal monitoring system for real time thickness measurement (1 nm precision).
- Intuitive touch screen to control the coating process and rapid data input.
- User friendly software that can be updated via network.
- Equipped with rotary sample holder.
- Equipped with electronic shutter.
- Equipped to motorized boat selection.
- 500 °C substrate heater.
- Two-year warranty.
Specifications
- High vacuum turbo pump 300 l/s.
- Diaphragm backing pump.
- Full range vacuum measuring gauge.
- 2.5 KW High current power supply.
- Precision Mass Flow meter (MFC).
- Able to record and plot coating parameters graphs.
- Transfers the curves and deposition process data by USB port to PC.
- Box Dimensions: 50 cm H x 60 cm W x 47 cm D.
- Shipping weight:
Related products
Desktop Coaters
Evaporation deposition
Desktop Coaters
Desktop Coaters
DSCT: Turbo Sputter/Carbon coating Desktop system for SEM/TEM
Plasma cleaner/Asher
SEM/TEM sample prep
DCR- Desktop Carbon Coating System:SEM/TEM sample prep Vac Techniche
